Journal / Elita Interiors
Modular Kitchen Cost in Bangalore: What Your Budget Actually Buys
Two kitchens can look the same on day one and cost twice as much. The difference is in the box, the hardware and the edges. Here's where your money goes.

A modular kitchen is the single most expensive piece of furniture in most homes, and the one that works hardest. It also has the widest price range. In Bangalore, you can be quoted ₹2.5 lakh or ₹12 lakh for a kitchen of the same size.
This guide breaks down where that money goes, so you can tell the difference between a kitchen that costs more and a kitchen that is worth more.
The short answer
For 2026, published estimates put modular kitchen cabinetry at roughly:
Laminate shutters: ₹1,400 to ₹2,000 per sq ft
Acrylic shutters: ₹2,000 to ₹3,000 per sq ft
PU (painted) shutters: ₹3,000 to ₹4,000 per sq ft
For a complete mid-range kitchen in Bangalore, including countertop and hardware, ₹4 lakh to ₹7.5 lakh is a common range. Compact straight kitchens can come in below that; large L-shaped or island kitchens with tall units and premium hardware go well above it.
Kitchen carpentry is priced on the face area of the cabinets (width × height of the front), not the floor area of the kitchen.
Roughly what each budget gets you
These are broad tiers, to help you set expectations rather than fixed prices:
Around ₹2.5–4 lakh. A straight or parallel kitchen, laminate shutters, standard plywood carcass, basic hinges and channels, granite countertop. Functional and durable if the plywood grade is right. This is where corners get cut, so check the carcass grade carefully.
Around ₹5–8 lakh. An L-shaped or parallel kitchen with tall units, laminate or acrylic shutters, BWP plywood carcass, soft-close hardware from a recognised brand, a few organisers (cutlery, plate rack, a corner solution) and quartz or good granite on top.
₹10 lakh and above. Larger layouts or islands, acrylic, PU or veneer finishes, handle-less profiles, lift-up wall units, tall pantry pull-outs, premium hardware throughout and integrated appliances.
What moves the price most
Layout. Straight and parallel kitchens are the most economical. Every corner adds cost, because corners need special hardware to be usable. A good corner solution alone can add ₹18,000 to ₹45,000.
Tall units. A full-height pantry or appliance tower uses a lot of board and hardware. One tall unit can cost as much as a metre of base cabinets.
Shutter finish. The finish carries most of the price difference between kitchens of the same size. Laminate is the most practical for heavy Indian cooking; acrylic and PU look premium but need more care. Our veneer vs laminate guide covers which surface suits which room.
Hardware. Hinges, drawer channels, baskets and lift systems are where cheap kitchens fail first. You use them dozens of times a day.
Countertop. Granite is the economical, durable default. Quartz costs more and offers a more uniform look.
Where cheap kitchens fail
In renovation work, the problems we see are almost always the same:
Swollen boards under the sink, from MR-grade plywood or particle board used where water is.
Edges peeling or swelling, from hand-applied edge tape instead of machine edge-banding.
Sagging shutters and drawers, from generic hinges and channels.
Bowed tall doors, from using thin plywood for large shutters.
None of these show on installation day. All of them show within two monsoons.
What to ask for in writing
Carcass material, grade (BWP or BWR) and brand.
Shutter material and finish, separately from the carcass.
Thickness of carcass and shutters.
Hardware brand for hinges, channels and baskets.
Whether all edges are machine edge-banded.
Countertop material and thickness, and whether it is included.
Whether the sink, hob, chimney and installation are included.
Our approach
Every Elita kitchen is manufactured in our Hennur factory: BWP plywood carcasses, HDHMR shutters, laminates pressed onto the boards on our hot press, panels cut to size, and every edge banded by machine before the CNC and boring stages. For more on materials, read our guide to the best material for kitchen cabinets. Site measurement is free, and you are welcome to visit the factory to see kitchens being built.
Book a free site visit
Tell us about your space. We’ll help you plan the next step.
Questions about this topic
What is the modular kitchen cost per sq ft in Bangalore?
Published 2026 estimates put cabinetry at roughly ₹1,400 to ₹2,000 per sq ft for laminate, ₹2,000 to ₹3,000 for acrylic and ₹3,000 to ₹4,000 for PU finishes, measured on the face area of the cabinets.
How much does a 10 × 10 ft modular kitchen cost?
It depends far more on layout, finish and hardware than on room size. A simple L-shaped laminate kitchen in a room that size often falls in the ₹3 lakh to ₹6 lakh range including countertop.
Which finish is best for an Indian kitchen?
Laminate is the most practical for heavy cooking: durable, heat and scratch resistant and easy to clean. Acrylic and PU look more premium but need more care.
Is plywood or HDHMR better for kitchen cabinets?
Use BWP plywood for the carcass, especially under the sink, and HDHMR for the shutters, which stays flatter and machines cleanly.